gamewell-fci 12 clintonville road, northford, ct 06472-1610 usa ? tel: (203) 484-7161 ? fax: (203) 484-7118 specifications are for information only, are not intended for installation purposes, a nd are subject to change without notice. no responsibility is assumed by gamewell-fci for their use. ?2015 honeywell international inc. all rights reserved. www.gamewell-fci.com 9020-0556 rev. k1 page 1 of 2 am-50 series am-50 series amplifiers signaling s186 9 approved city of denver 3017416 approved fm approved class 1 class 2 high rise chicag o city of fdny: coa #6077 mea approved 7165-1703:0125 description the gamewell-fci, am-50 series amplifiers are a 50 watt, digital, switching power amplifier. the following lists the 2 types of am-50 series amp lifiers that may be ordered. ? the am-50-25 amplifier produces 25 v rms audio output. ? the am-50-70 amplifier produces 70.7v rms audio output. the amplifiers are components of the following e3 series ? systems. ? e3 series expandable emergency evacuation system ? e3 series combined fire and mass notification system ? e3 series broadband voice evacuation system warning: am-50 series amplifiers node restriction: the ini-vgx can support up to 4 am-50 series amplifiers with the same output voltage. however, you cannot wire an am-50-25 amplifier and an am-50-70 amplifier to the same ini-vgx voice gateway node. each am-50 series amplifier provides 2 speaker circuits that can be wired style y (cla ss ?b?) or style z (class ?a?). the terminal connections can accommodate up to 12 awg, twisted-pair, shielded wire. both speaker circuits pro- duce a combined total of 50 watts of power. the 50 watts of power can be divided between the 2 integral class a/b speaker circuits. the 2 speaker circuits may be individually activated and supervised by an ini-vgx transponder voice gateway. the am-50 series amplifier can be programmed to broad- cast 16 messages generated fr om its local ini-vgx voice gateway. in addition, the am-50 series amplifiers produce superior clarity for intelligible live voice paging. when the selected system sensor, spectralert ? advance series speakers are used with the manufacturer?s 520 hz audiophile, the e3 series ? system is compliant with ul standard 464 low frequency requirements. for additional information, refer to the spectralert advance series data sheet, p/n:9021-60346. installation as many as four am-50 series amplifiers can be installed in the following cabinets when supervised and controlled by an ini-vgx voice gateway. ? cabinet b, inx cab-b ? cabinet c, inx-cab-c ? cabinet d, inx-cab-d e3 series ? and spectralert ? are registered trademarks of honeywell international inc. ul ? is a registered trademark of underwriters laboratories, inc. features ? listed under ul ? standard 864, 9th edition. ? listed under ul standard ul2572 for mass notification. ? complies with ul standard 464 for 520 hz low frequency. ? provides digital, switch ing amplifier technology. ? produces 50 watts of digital power. ? includes 2 speaker circuits, wired style y (class b) or style z (class a). ? up to 4 am-50 series amplifiers with the same out- put voltage can be contro lled by the ini-vgx voice gateway. am-50-25 am-50-70
gamewell-fci 12 clintonville road, northford, ct 06472-1610 us a ? tel: (203) 484-7161 ? fax: (203) 484-7118 9020-0556 rev. k1 page 2 of 2 www.gamewell-fci.com description (continued) the am-50 series amplifiers can be installed using the am-50 extender plate whenev er the e3 series control panel is used in conjunction with the autonomous control unit of the e3 series combined fire and mass notification system. ? cabinet c, e3 incc-cab-c for additional information, refer to the e3 series combined fire and mass notification data sheet, p/n:9021-60758 specifications am-50-25 amplifier operating voltage: 27.3 to 20.4 vdc operating current: 0.086 amp normal standby alarm current: 2.206 amp max. alarm @ 50 watt audio output: 50 watts max. @ 25 v rms am-50-70 amplifier operating voltage: 27.3 to 20.4 vdc operating current: 0.049 amp normal standby alarm current: 2.30 amp max. alarm @ 50 watt audio output: 50 watts max. @ 70.7 v rms am-50 series amplifiers relative humidity: 0 to 93% max., (non-con- densing) at 90 f (32 c) operating temperature: 32 to 120 f (0 to 49 c) dimensions: 7 1/2? w x 3 1/2? h x 1 1/4? d (19 w x 9 h x 3 d cm) ordering information part number description 1100-0456 am-50-25, inx 25v rms audio output, 50 watt amplifier am-50-70 inx 70.7v rms audio output, 50 watt amplifier
|